Our recommendations are made independently through Research & Testing. We may receive commissions from purchases made via our links.
Black and Decker WMD200B Double vs Cuisinart WAF-F20P1 Double Side-by-Side Comparison
Our Verdict
- Performance (50%)6.2/10
- Design (20%)8.8/10
- Ease of Use (30%)9.2/10
- Performance (50%)8.0/10
- Design (20%)9.2/10
- Ease of Use (30%)8.7/10
Both models here are double-sided, but they’re vastly different in characters and pricing. See for yourself which is a better fit for your kitchen here!
Both are double-sided waffle makers. However, the Cuisinart WAF-F20P1, with the advantage of being a high-end product, makes for a far better buy than the Black and Decker WMD200B Double waffle maker.
It's evident from the first look that the Cuisinart WAF-F20P1 has excellent build quality. It is made from a combination of stainless steel and lightweight plastic. The plastic parts, however, aren't shoddily built like in budget waffle makers.
The Black and Decker WMD200B also has good build quality, but it can't compare to the Cuisinart regarding the design's intricacy or premium feel.
But where the Cuisinart WAF-F20P1 shines the brightest is in its performance. With an excellent assessment of every facet, it easily triumphed over the WMD200B.
The only issue with the WAF-F20P1 is its high pricing. Besides that, it is a superior waffle maker compared to the WMD200B.
Black and Decker Double Flip Waffle Maker’s Performance
- Self-Mixed Recipe (50%)6.1/10
- Birch Benders Mix (50%)6.3/10
- Self-Mixed Recipe (50%)6.5/10
- Birch Benders Mix (50%)9.6/10
Self-Mixed Recipe
- Heat Level: N/A
- Cooking Time: 5 minutes
The WMD200B’s performance was disappointing in this test. With the updated recipe, we had expected it to show better results. Unfortunately, the coloration, texture, and taste were still acceptable at best and mediocre at worst.
Color (35%) — 5.25/10
- Color result: Very dark brown (Top)—Very light gold (Bottom)
- Color distribution: Uneven
The BLACK+DECKER WMD200B still suffered from uneven heating, a problem we already noticed in the first rounds of testing. The top side of the waffle was so well-cooked that some spots looked charred. Meanwhile, the bottom was several shades lighter. The odd difference in coloring made the waffle look very unappealing.
Texture (25%) — 6.5/10
- Texture: Mediocre
- Aeration level: Medium level. Bubbles were beginning to form but hadn’t finished developing
The aeration rate was low. Nonetheless, we still saw plenty of air bubbles spread throughout the interior of the waffle. And while there was a degree of mushiness to the waffle, it wasn’t so bad to the point of being limp and soggy.
Taste (40%) — 6.5/10
- Taste: Sweet and flavorful. A hint of bitterness from the burnt spots.
- Mouthfeel: Soft. Burnt spots give the waffle a dry texture.
Flavor-wise, our chef gave the waffle a passable score. Although the flavors were there, the bitterness from the burnt top crust ruined the overall taste profile of the waffle. Plus, the unremarkable texture of the waffle didn’t do the WMD200B any good in this section.
- Heat Level: 3
- Cooking Time: 5 minutes
The Cuisinart waffle maker did a great job in the second version of the self-mixed recipe test. Compared to the result from the first attempt, the scores saw significant improvements. The coloring was darker than we’d prefer, but the crust wasn’t charred. And despite the texture being fairly mediocre, the waffle was flavorful, nevertheless.
Color (6.5/10) — 35%
- Color tone: Very dark brown — Light gold (Both sides)
- Color distribution: Even
The coloring was not optimal. Both sides of the waffle have a dark, toasted-looking appearance. The dark brown shading notably concentrated inside the waffle's wells and on the waffle's outer sections. Outside the wells and toward the center, the waffle has a very beautiful golden brown color.
Texture (5.5/10) — 25%
- Texture: Mediocre
- Aeration level: Low; bubbles were few and under-developed
Unfortunately, the texture was mediocre. Aeration was minimal, resulting in a fairly dense waffle that wasn’t as soft or spongy as we would have liked.
Taste (7/10) — 10%
- Flavor: Tasty; creamy from the butter and sweet, slightly salty
- Mouthfeel: Mushy due to the dense, un-aerated core
Despite the less-than-ideal coloring and texture, our chef gave the waffle a decent score. The addition of new ingredients to the recipe has fortified the waffle’s flavor profile. Alongside the usual sweetness of sugar, there was a rich, creamy taste of butter. And with one teaspoon of salt mixed in, the waffle also gained a slightly salty taste.
Overall, the WAF-F20P1 did a great job unlocking the batter's flavor profile.
Birch Benders Mix
- Heat Level: N/A
- Cooking Time: 7 minutes 30 seconds
Coloration is better with a more eye-catching golden brown tone. The color is distributed uniformly across the whole waffle. Despite not having a high aeration level, the waffle still attains a soft and spongy texture, albeit slightly mushy. Our chef rated the waffle’s taste as good, citing its sweet flavor. But she clocked a few points due to the taste of raw batter still being present.
Color (35%) — 6.3/10
- Color result: Golden brown (Top) - Pale gold (Bottom)
- Color distribution: Even
In the pre-made mix test the coloration was better compared to our self-made recipe. The top side achieved a beautiful golden brown color that was spread evenly throughout the waffle. The indents had slightly darker coloring, but they weren’t burnt or charred.
The bottom of the waffle was a lot less impressive. It had a pale yellow, almost white color, which seemed to point to the waffle being undercooked.
Interestingly, the same disparity in coloration between the two sides of the waffle can be observed in other performance tests that we’ve done with the WMD200B.
Texture (25%) — 5/10
- Texture: Mediocre
- Aeration level: Low level, bubbles were tiny in size.
The aeration level is low. The waffle was filled with small bubbles, which created a soft and spongy texture. However, because the batter hadn’t been fully developed, the core of the waffle still felt a little mushy and moist when touched.
Taste (40%) — 7/10
- Taste: Sweet and flavorful, but with a hint of raw batter due to the undercooked bottom
- Texture: Soft at the top, pulpy at the bottom.
Our chef rated the waffle “good”. The WMD200B brought out the waffle's sweet and slightly savory flavor.
Unfortunately, the undercooked bottom impacted the mouthfeel of the waffle, which was pulpy compared to the soft and consistent top side.
- Heat Level: 3
- Cooking Time: 5 minutes
The waffle maker performed wonderfully in our test with the Birch Benders mix. It is the first waffle maker so far to get two consecutive perfect scores from our chef. The coloration is excellent, with an evenly cooked golden-brown crust. The waffle's texture can still be improved, but ultimately very good. Taste-wise, though there were minor issues here and there (like an interior that's a bit too moist), our chef gave it a perfect score due to its great flavor and mouthfeel.
Color (10/10)
- Color tone: Golden brown
- Color distribution: Even
The coloration is one of the best we’ve seen. Thus, it got a perfect score in this section. The crust on both sides has a beautiful golden brown tone, distributed evenly across the entire waffle.
Texture (8.5/10)
- Texture: Excellent
- Aeration level: High; air bubbles were fully developed
The waffle has nicely developed. Air bubbles can be seen throughout the waffle’s core, which explains the soft and fluffy texture. Unfortunately, it is not perfect: the waffle still contains too much moisture.
Taste (10/10)
- Flavor: Sweet and slightly savory
- Mouthfeel: Soft and pliant
It is a delicious waffle with a sweet and savory flavor. The mouthfeel is excellent, with it being soft and pliant in the mouth.
Although, as previously mentioned, the texture is too moist, it didn’t affect the overall tasting experience much. Our chef was willing to overlook this detail to give the waffle a full score.
Black and Decker Double Flip Waffle Maker’s Design
- Build Quality (60%)10/10
- Waffle Plates (30%)9.5/10
- Control Panel (10%)0/10
- Build Quality (60%)9.0/10
- Waffle Plates (30%)9.5/10
- Control Panel (10%)9.5/10
What’s In the Box of the Black and Decker Rotating Waffle Maker?
- Waffle maker
- Drip tray
- User manual
In the shipping box, you will find the waffle maker, a drip tray, and a user manual. Everything is nicely packaged in plastic wraps and foam blocks.
- Cuisinart WAF-F20P1 waffle maker
- User manuals
- Measuring cup
The shipping box includes the waffle maker, the user manual and quick-start guides, and a measuring cup.
Dimensions
- Length:13.0" (33.0 cm)
- Width:7.5" (19.1 cm)
- Height:7.0" (17.8 cm)
- Weight:7.3 lbs (3.3 kg)
The body is bulkier and larger than standard models, which might make storage a challenge. The WMD200B is heavier, too. At 7.25 pounds, it is easily twice the weight of your average waffle maker. Most of the additional weight comes from the extra pair of waffle plates.
- Length:15.0" (38.1 cm)
- Width:9.5" (24.1 cm)
- Height:9.0" (22.9 cm)
- Weight:12.0 lbs (5.4 kg)
Due to the double-sided design, the Cuisinart WAF-F20P1 is larger and bulkier than your average waffle maker. Additionally, because it is primarily made of metal, it’s also heavier than most, coming in at 12 pounds. Moving the waffle maker in and out of storage is difficult.
Build Quality
The exterior of the waffle maker is made from black plastic. While durability is a definite concern, plastic is lighter and less thermally conductive, thus safer than metal.
Other parts of the waffle maker, like the base, the handle, and the hinges, are all solidly constructed. We especially like the metal-clad cabling connecting the heating elements and electronics. The metal cladding ensures durability and protects from electrical leakage.
Build quality is good. Many of the machine’s parts are made of stainless steel, such as the lid shells. They give the machine an aesthetically-pleasing look and a luxurious shine.
However, only some parts are made from metal. The outer rim of the base, as well as the supporting legs, are made from plastic. They’re merely painted silver to mimic the look of brushed metal. Cuisinart didn’t disclose this information in the marketing spread, which has angered many customers.
Waffle Plates
- Number of Plates:4
- Grid Pattern:Belgian-style
- Plate Area:36.32 inches
- Plate Length:6.8" (17.3 cm)
- Plate Width:6.8" (17.3 cm)
- Material:Cast iron
- Non Stick Coating:Yes
- Removable:No
- Dishwasher Safe:No
The waffle plates are made from cast iron and boast a layer of proprietary non-stick coating. BLACK+DECKER hasn’t elaborated much on its non-stick formula. However, they did tell us that the coating is: “stable, inert, non-reactive, and PFOA-free”.
The waffle plates are not removable.
- Number of Plates:4
- Grid Pattern:Belgian-style
- Plate Area:36.32 inches2
- Plate Length:6.8" (17.3 cm)
- Plate Width:6.8" (17.3 cm)
- Material:Cast aluminum
- Non Stick Coating:Yes
- Removable:No
- Dishwasher Safe:No
Cuisinart designed and constructed the waffle plates well. They’re made from cast aluminum and coated with a non-stick Teflon layer.
Our temperature tests found that both sets of waffle plates heated evenly. Most of the time, they were at the same temperature.
Unfortunately, the waffle plates aren’t removable, so they’re tricky to clean.
Control Panel
- Indicator Lights:Yes
- Audible Alarm:No
- Timer:No
- Browning Control:No
The BLACK+DECKER WMD200B does not come with a control panel.
Instead, it has a series of indicator lights. One is a red POWER light, which comes when you plug in the waffle maker. The other is a green READY Light, which lights up when the waffle maker reaches the correct cooking temperature.
You will find the lights at the waffle maker's top and bottom.
As it lacks any real control features, we cannot give it any points for this section.
- Indicator Lights:Yes
- Audible Alarm:Yes
- Timer:No
- Browning Control:Yes
The control panel consists of a temperature knob and a power switch. Both are easy to use.
There are two indicator lights on either side of the waffle maker. These green lights (READY lights) turn on when the waffle plates have been heated to the correct temperature. This model also comes with an audible alarm, which beeps when the waffle maker is ready.
The Cuisinart WAF-F20P1 does not have a POWER indicator to show if it’s receiving power. We had to hold a hand over the warming waffle plates to confirm the machine was getting power. Not only is that a hassle, but it’s also a possible safety issue. If you’re not in a hurry, you can always wait to see if the READY lights illuminate.
Black and Decker Double Flip Waffle Maker’s Power Cord
- Plug Style:Type A (Flat Blade Attachment Plug)
- Length:2.0 ft (0.6 m)
- Cable Management:No
The power cord is very short, measuring only around 24 inches. Be sure to keep the waffle maker close to a power outlet. If not, use an extension cord.
There’s no cable management feature on the waffle maker.
- Plug Style:Type A (Flat Blade Attachment Plug)
- Length:2.6 ft (0.8 m)
- Cable Management:Yes
The power cord of the Cuisinart WAF-F20P1 measures 31 inches long, which is reasonable. Underneath the base, you’ll find a pair of hooks inside a large enclosure. You can wrap the power cord around the hooks, then nestle the cord bundle into the compartment. It makes storage neater.
Accessories
- Material:Plastic
- Removable:Yes
- Dishwasher Safe:Yes
The BLACK+DECKER WMD200B comes with a plastic drip tray.
- Material:Plastic
- Removable:Yes
- Dishwasher Safe:Yes
The Cuisinart WAF-F20P1 comes with a dishwasher-safe measuring cup.
Black and Decker Double Waffle Maker Review
- Handling (25%)9.5/10
- Safety (40%)10/10
- Cleanability (25%)8.5/10
- Indicator Light Visibility (10%)7.0/10
- Handling (25%)9.0/10
- Safety (40%)9.5/10
- Cleanability (25%)6.5/10
- Indicator Light Visibility (10%)10/10
Handling
The large handle allows for an easier and more comfortable grip. Located right within the handle is the lid lock. It can be engaged or disengaged with a push or pull motion, respectively.
WMD200B is rotatable. The rotating mechanism of our review unit worked smoothly.
The lid opens and closes smoothly. An intuitive lid lock mechanism secures the lid. The lock disengages on its own when you pull the handle upward. The safety will click into place again when you close the lid.
The waffle iron section rotates smoothly and easily. However, it is heavy, so it takes a little force.
Safety
- Top Side Temperature:144°F
- Bottom Side Temperature:86°F
- Handle Temperature:87°F
The top side of the waffle maker can get quite hot after a few cooking sessions. We measured a peak temperature of 144°F, hot enough to cause a minor burn injury.
All other parts remained cool to the touch. The handle was 87°F, and the base of the waffle maker was 86°F.
- Top Side Temperature:234°F
- Bottom Side Temperature:85°F
- Handle Temperature:105°F
The most noteworthy issue is the lack of a POWER light, which, as we mentioned earlier, is a safety risk.
Other than that, the waffle maker is safe to use. The lid is rock-solid and won’t snap down suddenly. After several cooking sessions, the handle was only warm to the touch (105°F).
The top side measures around 234°F.
Because the base is removed from the waffle maker’s body, it remains at room temperature (89°F).
Cleanability
Most parts of the BLACK+DECKER WMD200B are easy to clean. But some awkward spots may give you trouble, such as the tiny nooks next to the handle. Liquid waffle batter can drip inside and dry out within. The size of the corner makes it very difficult to guide a towel inside and scrub out the dried mess.
The included drip tray makes dealing with batter spillages a lot easier.
The Cuisinart WAF-F20P1 doesn’t come with a drip tray, so spills weren’t easy to clean up. We also found it very difficult to clean the side of the waffle maker once the batter had solidified. The batter’s grip on the metal was so firm that we had to use detergent to get it off. Even after getting the clumps off, we could still see residue.
The waffle plates were easy to clean, thanks to their non-stick layer. Cooked waffles usually slid cleanly off the plates. Leftover crumbs and debris could be quickly swept up with paper towels.
Indicator Light Visibility
The indicator lights were bright enough to see from across the room under normal lighting conditions. Under studio lighting, they became very difficult to see from afar. We had to walk up to the waffle maker to view the lights.
The READY lights can be seen clearly, even under harsh studio lighting.